TD4800 Terrace Door

Technical specifications and performance data.

TD4800

TD4800 Terrace Door

Frame Construction

The frame is thermally broken using high density polyurethane.
Constructed from .100" nominal material wall thickness aluminum of 6063-T5 alloy with a depth of 3½".
An equal leg frame is standard.
Corners are mitered, anchors reinforced, hydraulically crimped, and back sealed with small-joint seam sealer.

Door Leaf Construction

The 2⅛" deep vent consists of tubular aluminum members with .100" nominal material wall thickness aluminum of 6063-T5 alloy with two thermal struts.
Corners are mitered, anchors reinforced, hydraulically crimped, and back sealed with small-joint seam sealer.

Weather Stripping

All door leaves are triple weather-stripped with two bulb gaskets and one EPDM gooseneck rubber gasket.

Thermal Barrier

Frames are thermally broken using a poured high density polyurethane thermal barrier.
Door leaves are thermally isolated with two thermal struts mechanically crimped in raceways extruded in the exterior and interior extrusions.

Hardware

Three European profile hinges on each door (standard).
Maximum security deadbolt lock with latch operated by lever handle.
Multi-point locking hardware provides enhanced security.
Lock sets available in both sides key or outside key with knob on the inside.

Glazing

Doors are outside glazed with extruded aluminum glazing bead and neoprene drive-in wedge against the exterior of the glass.
1" insulated glass is accommodated.

Performance Data

AAMA Rating	AW-PG60
Air Infiltration	<.10 CFM/SF @6.27 PSF
Water	No leakage @15 PSF
Structural	≤0.3 mm @ ±90.23 PSF
Forced Entry	NO ENTRY per AAMA 1304

← Back to Product