AW2500 Awning Window

Technical specifications and performance data.

AW2500

AW2500 Awning Window

Main Frame Construction

Frame is thermally broken using high-density polyurethane.
Constructed from 0.080" nominal wall thickness 6063-T5 aluminum alloy with a 2-½" frame depth.
Corners are mitered, anchors reinforced, hydraulically crimped, and back-sealed with small-joint seam sealer.
Equal leg frame provided as standard.

Vent Frame Construction

Vent sash members are fabricated from 0.080" nominal wall thickness 6063-T5 aluminum alloy.
Incorporates poured and debridged polyurethane thermal barrier.
Corners are mitered, reinforced, hydraulically crimped, and sealed with small-joint seam sealer for improved structural rigidity.

Weather Stripping

Each window is dual weather-stripped with two-bulb gaskets for air and water infiltration resistance.
Two weep slots per vent frame allow effective water drainage through the system.

Screens

Screen frames are extruded 6063-T5 aluminum alloy.
Standard infill consists of 18x16 fiberglass mesh for optimal visibility and durability.

Thermal Barrier

All frames and vents are thermally broken using a poured high-density polyurethane barrier.
Reduces conductive heat transfer and limits condensation along interior surfaces.

Hardware

Locking cam handles.
Four-bar hinges manufactured from stainless steel for corrosion resistance.
Support arms on both sides to limit window opening and provides extra support to window strength.

Glazing

Windows are inside-glazed with an extruded aluminum snap-in glazing bead.
Accommodates glazing thicknesses for ¼" and 1".
Design allows ease of glass replacement and consistent pressure distribution.

Installation Clip

Optional F-clip and Z-clip provided for simplified installation and system alignment.

Optional

Window optional: apply grid.

← Back to Product